Recommended

M990 GNSS Receiver

M100T GNSS Receiver

M100TT GNSS Receiver

M328 GNSS Receiver

M2 GNSS Receiver

GPS500 GPS Antenna

HT- 1A Helical Antenna

HT-2D Choke Ring Antenna

HT-3D Choke Ring Antenna

HT-2D Choke Ring Antenna


The choke measuring antenna meets the needs of highprecision measure-ment and multisystem compatibility for measurement equipment. Widely used in CORS stations set up, land surveying, seismic monitoring, moni-toring of landslides, bridges and other highprecision measurement of de-formation monitoring applications.

  • Features
  • Specifications
  • Aplication

 The antenna part of the multi-point design and fully symmetrical antenna structure, phase center accuracy to millimeter level, and the phase center of high stability, good repeatability;

 The use of 2D choke coil design, to achieve excellent multi-path suppression effect;

 The antenna low elevation gain, high altitude satellite signal tracking ability, to ensure that the system has enough number of satellites;

 LNA part of the pre-filter design, effectively suppress the band interference signal, to avoid causing the amplifier saturation, improve system reliability;

 Built-in lightning and voltage regulator circuit, the effective protection of the amplifier to ensure that the normal work in harsh environments;

 Shell with high reliability of the engineering plastics, using the overall waterproof design,waterproof rating IP67, to ensure that the antenna can work outdoors for many years.

Antenna indicators

Frequency Range:
-GPS: L1,L2,L5
-GLONASS :L1,L2
-BD2:B1,B2,B3
-Galileo:E1,E5a,E5b,E6
-Impedance:50Ω
Polarization mode: right-handed circular polarization
The antenna axial ratio:≤3dB
Horizontal coverage angle:360°
Output standing wave:≤1.5
Vertex gain:≥5dBi
Phase center error:±1mm

Environmental

Working Temperature: -55°C to +85°C
Storage Temperature: -55°C to +85°C
Working storage humidity:95% (no condensation)

Low-noise amplifier index

Gain:50dB
Noise figure:≤2dB
Output standing wave:≤2
Operating Voltage:3.3~18VDC
Operating Current:≤55mA
Differential transmission delay:≤5ns

Structural properties

Size :Φ322×240mm
Connector Type: TNC-K
Bottom installation method:5/8"-11UNC
Weight: 5000g

Friendlink:

SunNav Technology Co.,Ltd.All rights reserved